Setting Up: Your Network61To set up your WiFi camera:Select WiFi Camera from the left side of the software underSelect Camera Type.1. Make sure the Canon WFT is connected to yourcamera.2. Turn the camera on.3. Use the WFT connection wizard through the cameramenu. For more details on finding the WFT wizard, refer to the camera manual.4. Select FTP as the communication method in the camera wizard.5. Enter your wireless network & router settings in the camera wizard.6. Once the FTP Server settings appear on your camera, enter the FTP Address andFTP Port listed on the Cameras page in the software. You must have Auto-DetectAddress checked for this option.7. Once Login Method appears on your camera, use either ―Anonymous‖ or matchthe username and password that you entered on the Cameras page. You musthave Anonymous Username checked to login anonymously without a password.8. Once Target Folder appears on your camera, select Root Folder.9. Complete the Wizard.10. Your WiFi camera is now ready.A WiFi camera is essentially a tethered camera without a cable. While you are using aWiFi camera, you can press SPACE on your keyboard to automatically capture andimport photos into the Photo Library or Photo Workshop. For a detailed guide ofcapturing and importing photos, go here.Setting Up a Hot FolderYou can set up a folder to automatically import all new photos added to that folder.The software will continuously monitor this folder for any photos added by you or acamera.To set up a hot folder:1. In Local Folder, browse to or type in the folder to monitor.
