Canon TS3500 Series Online Manual

Also see for TS3500 Series: Online manual Online manual Online manual Online manual Getting started

Borderless PrintingPerforms borderless printing without any margins on the paper.With the borderless printing function, the document to be printed is enlarged, so that it extendsslightly off the paper. In other words, the document is printed without any margin.To adjust the amount that the document extends beyond the paper, click the Page Setup tab,choose Borderless, and enter the value in Amount of Extension.Grayscale PrintingThis function converts the data to monochrome data when printing your document.DraftThis setting is appropriate for test printing.Color/Intensity Manual AdjustmentSelect when you set the Color Correction method and individual settings such as Cyan, Magenta,Yellow, Brightness, Contrast, etc.Media TypeSelects a type of printing paper.Select a media type that matches the paper that is loaded in the printer. This ensures that printing iscarried out properly for the specified paper.Printer Paper SizeSelects the size of paper actually loaded into the printer.Normally, the paper size is set automatically according to the output paper size setting, and thedocument is printed with no scaling.When you set 2-on-1 Printing or 4-on-1 Printing in Additional Features, you can manually set thepaper size with Page Size on the Page Setup tab.If you select a paper size that is smaller than the Page Size, the document size will be reduced. If youselect a paper size that is larger, the document size will be enlarged.Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify anyvertical and horizontal dimensions for the paper size.OrientationSelects the printing orientation.If the application used to create your document has a similar function, select the same orientation thatyou selected in that application.PortraitPrints the document so that its top and bottom positions are unchanged relative to the paper feeddirection. This is the default setting.LandscapePrints the document by rotating it 90 degrees relative to the paper feed direction.You can change the rotation direction by going to the Canon IJ Printer Assistant Tool, openingthe Custom Settings dialog box, and then using Rotate 90 degrees left when orientation is[Landscape] check box.To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Print QualitySelects your desired printing quality.Select one of the following to set the print quality level that is appropriate for the purpose.189