Appears after performing network setup and clicking Set to close the window.• Requires Setup•Indicates the printer is required to perform Wi-Fi setup.Performing/Changing Wi-Fi Settings• Not Set•Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address orenable IPv6 on Network Settings....Performing/Changing Wi-Fi Settings• IP Address Overlap•Indicates the IP address is duplicated to another printer.• Unknown•Indicates the printer recognized as Available in the past cannot be used currently.Note• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.•D: IP AddressDisplays the printer IP address. Nothing is displayed if the printer status is Requires Setup.Note• If USB is selected from the pulldown menu on the toolbar, "-" is displayed.E: LocationDisplays the printer location if it is registered. Nothing is displayed if the printer status is RequiresSetup.Note• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.Assigning Printer InformationF: Connection MethodDisplays printer connection method (wired LAN, Wi-Fi, or USB).Note• If USB is selected from the pulldown menu on the toolbar, USB is displayed.• If the printer supports both of the LAN connection methods, the printer is recognized as twoprinters and they are displayed separately. (The same numbers are displayed on Serial Number(Last 5 Digits).)• If the printer does not support wired LAN, wired LAN is not displayed.• If you are using IJ Network Device Setup Utility on the computer which does not support Wi-Fi,Wi-Fi is not displayed.G: Setting MethodDisplays printer setting method.• Auto•52