Insert blank pageSelects whether to print the document on one side or both sides of the booklet.Check this check box to print the document on one side of the booklet and select the side to be leftblank from the list.MarginSpecifies the width of the stapling margin.The specified width becomes the stapling margin from the center of the sheet.Page BorderPrints a page border line around each document page.Check this check box to print the page border line.Specify Margin dialog boxThis dialog box allows you to specify the margin width for the side to be stapled. If a document does not fiton one page, the document is reduced when printed.MarginSpecifies the width of the stapling margin.The width of the side specified by Stapling Side becomes the stapling margin.Print Options dialog boxMakes changes to print data that is sent to the printer.Depending on the environment, this function may not be available.Disable ICM required from the application softwareDisables the ICM function required from the application software.When an application software uses Windows ICM to print data, unexpected colors may be producedor the printing speed may decrease. If these problems occur, checking this check box may resolvethe problems.Important• Uncheck this check box under normal circumstances.• This function does not work when ICM is selected for Color Correction on the Matching tab ofthe Manual Color Adjustment dialog box.Disable the color profile setting of the application softwareChecking this check box disables information in the color profile that was set on the applicationsoftware.When the information in the color profile set on the application software is output to the printer driver,the print result may contain unexpected colors. If this happens, checking this check box may resolvethe problem.Important• Uncheck this check box under normal circumstances.• Even when this check box is checked, only some of the information in the color profile isdisabled, and the color profile can still be used for printing.202