Canon VB-H47 Operation Manual

Also see for VB-S32D: Installation guide Installation guide

127By linking two types of events, a single event is triggered. Select AND/OR for the event linking method.Able to set the operations to perform, such as recording video or sending e-mail notifications, when a linked event istriggered.Note• Able to check the linked event status on the [Event and Input/Output Menu] of the Camera Viewer (P. 51).Linked Event 1 to 4Able to register up to four linked events.It is possible to link the following events: [Volume Detection], [External Device Input], [Timer] and [Intelligent Function].[Linked Event]Select whether to use a linked event.[Event Linking Method]Select the event linking conditions.When [AND] is set, a new linked event is triggered if both event types selected with [Event 1] and [Event 2] are triggered. Inthis case, set [Event Order] and [Event Gap].When [OR] is set, a new linked event is triggered if either event type selected with [Event 1] or [Event 2] is triggered.[Event Order]Able to select the trigger order of two events when [Event Linking Method] is set to [AND].If set to [None], the order will not be considered.[Event Gap (seconds)]Enter the trigger interval between two events when [Event Linking Method] is set to [AND].A new linked event is triggered if the second event triggers within the specified interval after the first event was triggered. Event 1, 2Specify the two events to be linked. The settings are the same for both.[Event Type]Select the event type for linking.[Volume Detection]Select an ON event or an OFF event in [Volume Detection Status] to trigger a linked event .[External Device Input]For [External Device Input], select the external device input to use.Select an active event or inactive event to trigger a linked event in [External Device Input Status].[Event] > [Linked Event]HM4x