Canon VB-H47 Operation Manual

Also see for VB-S32D: Installation guide Installation guide

144Settings for the camera name and external input/output device name, and camera operation and installation settings.Camera NameSet the camera name.[Camera Name], [Camera Name (alphanumeric characters)]Enter any camera name. Be sure to enter a name in the [Camera Name].Installation ConditionsConfigure settings for camera use suitable for the location the camera will be installed.[Dome]Select whether a dome is used. To use the camera with a dedicated indoor dome housing option for the camera, select[Enable].[LED Setting]Select whether to turn on the LED indicating the camera operation status.If [Turn On] is selected, the LED will light up when turning the power on, rebooting, and during normal use.When [Turn Off] is selected, the LED will light for several seconds during startup and then turn off.Regardless of the setting, the LED will flash when initializing the settings.Set to [Turn Off] if the dedicated indoor dome housing option for the camera is used, or if the reflected LED light interfereswith image capture entering the capture area, etc.[Video Flip]Select whether to vertically flip the video.Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk.Camera Position ControlSettings for camera operation when there are no camera control restrictions for users or requests for camera controlprivileges.[Restricted to Presets]Restricts the camera angle to the preset position including the home position, when users other than administrators controlthe camera with Camera Viewer, etc.[Camera Position without Control]Select the camera operation when there are no users with camera control privileges.If [Return to Home Position] has been selected, the home position of the camera must be set in advance with [Video] >[Preset] > [Register Preset] (P. 61).[System] > [System]HM4xHM4xHM4x S32VE S32D