Canon VB-H47 Operation Manual

Also see for VB-S32D: Installation guide Installation guide

28 Starting the Camera Viewer DirectlyAble to set [System] > [Viewer] > [General] > [Default Page] to [Display Viewer] in the Settings page to set the Vieweras the default page (P. 146).The authentication screen for the Viewer is displayed.The Camera Viewer is displayed.Camera Viewer Access RestrictionsTwo types of users can be set; authorized users, which require user authentication, and guest users, that do not requireauthentication.The functions that each user can use in the Camera Viewer depend on the privileges assigned to the user (P. 142).Note• If [System] > [Viewer] > [Viewer Settings] > [User Authentication] is set to [Do not authenticate] on the Settings page, the authenticationscreen is not displayed when connecting to the Viewer, and the user is connected as a guest user. Guest users can only perform someoperations with the Viewer, however it is possible to later switch users in order to use the Viewer as an administrator or authorized user.Click [Switch Users] to log into the Viewer again as an administrator or authorized user.1 Start the web browser.2 Enter the IP address and click the Enter key.3 Enter the administrator name and administrator password, and click [OK].Important• Multiple administrator accounts cannot connect to a single camera at the same time.An authorized user or a guest user can connect to the camera from multiple computers at the same time. When controlling a camera,the authorized user who acquired the control privilege later will be given the priority. On the other hand, guest users are placed in aqueue.