Canon WFT-E6 Manual

Also see for WFT-E6: User guide Instruction manual Guide Operational guide Guide

17A user name and password are required before the Wi-Fi Remote application (Wi-Fi-enableddevice connected to the Wi-Fi network) can access the transmitter in order to operate thecamcorder. Additionally, you can set a unique camcorder identification code and designate theport that Wi-Fi Remote should use. The Wi-Fi connection will be disabled while you changethese settings.[User Name]*, [Password]* Protect the remote operation of the camcorder with a user nameand password.[Port No.] The port number (HTTP protocol) used by Wi-Fi Remote. This isusually set to port 80, but you can change it if necessary.[Camera ID] Set a unique camcorder identification code that will appear on theWi-Fi Remote screen. This is convenient if you are using a multi-camera shooting setup.* Required settings.1Open the [Camera Settings] submenu.[w Other Functions] > [Wi-Fi Remote] > [CameraSettings]2Select the desired setting and thenpress SET.3Enter the desired value as describedbelow.If necessary, repeat steps 2 and 3 to set additionalsettings. When you finish changing the settings,select [L], press SET and then close the menu.When you close the menu after changing thecamcorder’s settings, the camcorder will reconnectto the Wi-Fi network using the new settings.[User Name], [Password], [Camera ID]1 Use the joystick or turn the SELECT dial to select a character and then press SETto add it.Repeat this step as necessary to enter the necessary text.2 After entering the desired text, select [OK] and then press SET.[Port No.]1 Push the joystick up/down or turn the SELECT dial to select a value for the firstfield and then press SET to move to the next field.2 After completing all the fields, select [Set] and press SET to enter the port number.Camcorder SettingsCOPY