8Before using the Wi-Fi Remote application to remotely control the camcorder, you need towirelessly connect the camcorder (with the transmitter attached) to a Wi-Fi network via anaccess point (wireless router). There are three ways to do so, and the method you use willdepend on the specifications of the access point you want to use.Note that using an unprotected Wi-Fi network can expose your data to monitoring byunauthorized third parties. Be aware of the risks involved.If your wireless router supports Wi-Fi Protected Setup (WPS), setup willbe easy and require minimal configuring and no passwords. To check ifyour wireless router has a WPS button and for details about how toactivate the Wi-Fi protected setup, refer to the instruction manual of yourwireless router.Even if your wireless router does not have a dedicated WPS button, it may support WPS usinga PIN code instead. For setup using a PIN code, you will need to know in advance how toactivate the wireless router’s WPS function. For details refer to the instruction manual of yourwireless router.If your wireless router does not support Wi-Fi Protected Setup (WPS) or you wish to manuallyconfigure settings, you can use the Connection Wizard to manually set the various settings.This requires more advanced knowledge of Wi-Fi and network settings.Three Ways to Connect to a Wi-Fi Network[WPS: Button][WPS: PIN Code][Connection Wizard]Depending on the country/region of use, some restrictions on outdoor use or Ad Hoc mode use mayapply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details see Areasof Use and Restrictions (separate leaflet supplied with the transmitter).COPY