9Wi-Fi Protected Setup (WPS) is the easiest way to set up the Wi-Fi network. However, it maynot work correctly if there are several active access points in the area. In such case try usingthe [WPS: Pin Code] (A 10) or [Connection Wizard] (A 11) option.1Open the [Set Up New] submenu.[w Other Functions] > [Wi-Fi Remote] > [Set UpNew]2Select [WPS: Button] and then pressSET.3Press the WPS button on the wirelessrouter.For details about how to activate the Wi-Fiprotected setup, refer to the instruction manual ofyour wireless router.4Within 2 minutes, press SET on thecamcorder.While [Connecting] appears on the screen, youcan press SET or the CANCEL button to cancelthe operation.After the connection is correctly established,continue with the procedure to configure the IPaddress assignment (A 15).Wi-Fi Protected Setup (WPS) - ButtonCOPY