2You can attach a WFT-E6 Wireless File Transmitter to a Canon camcorder to connect thecamcorder to a Wi-Fi network. This will allow you to operate the camcorder remotely from anydevice connected to the Wi-Fi network using Wi-Fi Remote, a Web browser application. Thisguide will explain how to attach the WFT-E6 to a camcorder and configure the transmitter foruse with a camcorder.For specifications and additional information about the WFT-E6, refer to the Wireless FileTransmitter WFT-E6 Instruction Manual. For details about compatible camcorders and how touse Wi-Fi Remote to operate the camcorder, refer to the camcorder’s Instruction Manual.AssumptionsThe instructions in this guide assume you already have a correctly configured and workingwireless network. For details on configuring these settings, refer to the documentationprovided with the respective Wi-Fi equipment.The instructions in this guide assume you are already familiar with basic camcorderoperations, such as accessing and changing menu settings or displaying status screens. Ifnecessary, refer to the camcorder’s Instruction Manual.Conventions used in this guideWarnings to avoid potential problems.Supplemental information.A Reference page number.“Access point” refers to a Wi-Fi network’s access point or wireless router.For brevity’s sake, throughout this guide the WFT-E6 Wireless File Transmitter will bereferred to simply as the “transmitter”.About this GuideSetting up the WFT-E6 Wireless File Transmitter and configuring the Wi-Fi Remote application requiresadequate knowledge about configuring Wi-Fi networks. Canon cannot provide support for configuringWi-Fi networks.Note that Canon shall not be liable for any loss of data or damage to the transmitter resulting fromincorrect Wi-Fi network configuration or settings. Additionally, Canon shall not be liable for any loss ordamage caused by the use of the WFT-E6 Wireless File Transmitter.IntroductionCOPY