14If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to oryou can connect directly to a Wi-Fi enabled device. Follow the instructions on the screen tocomplete the connection wizard.After step 2 in the Searching for Access Points procedure (A 12):1Select [Manual] and then press SET.2Select the wireless connection modeand then press SET.[Infrastructure]: Configure manually a connectionto a Wi-Fi network via a wirelessrouter.[AP 11b/g/n]*: Direct connection in AP mode to aWi-Fi enabled device using the2.4 GHz band.[AP 11a/n]*: Direct connection in AP mode to aWi-Fi enabled device using the5 GHz band.[Ad Hoc 11b/g]**: Direct Ad Hoc connection to aWi-Fi enabled computer or otherdevice using the 2.4 GHz band.[Ad Hoc 11a]**: Direct Ad Hoc connection to aWi-Fi enabled computer or otherdevice using the 5 GHz band.* Only camcorders compatible with AP mode.** Only camcorders not compatible with AP mode.3Enter the Wi-Fi network’s name (SSID).Select [Input] and then press SET to open thekeyboard screen.Use the joystick or turn the SELECT dial to selecta character and then press SET to add it. Repeatas necessary to enter the SSID.After entering the SSID, select [OK] and thenpress SET.Select [OK] and then press set.Manual Setup/AP Mode/Ad Hoc ConnectionCOPY