35You can edit the Wi-Fi network settings even after the initial setup. Changing settings manuallyrequires more advanced knowledge of Wi-Fi and network settings. The Wi-Fi connection will bedisabled while you change these settings. After completing the changes, the camcorder willconnect to the Wi-Fi network using the new configuration.1Select the network configuration profileyou want to change (A 26).2Open the Wi-Fi [Edit] submenu.[w Other Functions] > [Wi-Fi Remote] > [Edit]3Continue with one of the followingprocedures depending on the settingsyou wish to change.Changing Wi-Fi Settings4Select [LAN Setup] and then press SET.The wireless connection mode selection screenappears. Continue the procedure as described inManual Setup/AP Mode/Ad Hoc Connection(A 14, from step 2).Changing TCP/IP Settings4Select [TCP/IP] and then press SET.The TCP/IP settings screen appears.5Select [IP Address Assignment] andthen press SET.6Select [Automatic] or [Manual] and thenpress SET.If you selected [Automatic], IP settings will beassigned automatically and no further settings arenecessary.Select [L], press SET and then close the menu.Changing SettingsCOPY