20A user name and password are required before the Wi-Fi Remote application (Wi-Fi enableddevice connected to the Wi-Fi network) can access the transmitter in order to operate thecamcorder. Depending on the camcorder used*, you can set up to three different users andselect whether you want to allow single-user operation (only User 1) or multi-user operation(Users 2 and 3). The Wi-Fi connection will be disabled while you change these settings.[User 1] Can access all 3 Wi-Fi Remote screens: [Advanced Control], [Basic Control]and [Metadata Input].[User 2] Can access only the [Advanced Control] screen. This would be the mainoperator controlling the camcorder.[User 3] Can access only the [Metadata Input] screen. This would be the person incharge of keeping the clip information up to date.* Some camcorders are not compatible with multi-user operation. In that case, only one user can be set (A 22).1Open the [User Setting] submenu.[w Other Functions] > [Wi-Fi Remote] > [UserSetting]2Select one of the [User Name] fields andthen press SET. Enter the user name asdescribed following this procedure.3Select the corresponding [Password]field and then press SET. Enter thepassword as described following thisprocedure.If necessary, repeat steps 2 and 3 to set upadditional users. When you finish setting up all theusers, select [L] and press SET.4From the same [Wi-Fi Remote]submenu, select [Select User] andpress SET.5Select [User 1] (single-user operation)or [Users 2&3] (multi-user operation),press SET and then close the menu.User Settings for CamcordersWith Multi-User SupportCOPY