171Review the access point’s configurationand then press SET.Push the joystick up/down or turn the SELECT dialto review additional settings before pressing SET.2Save the current configuration.Select [OK] and then press SET twice. When theconfirmation message appears, press SET.Any previous settings will be overwritten by thenew settings you saved.2To change the [Network ConfigurationName], select [Input] and then pressSET.If you wish, you can give the network configurationprofile a more descriptive name to make it easierto identify. Enter the desired name using thekeyboard screen (A 10).3Save the network configuration.Select [OK] and then press SET. When theconfirmation message appears, press SET.Any previous settings will be overwritten by thenew settings you saved.Saving the Configurationmode (Camera Access Point connection)mode (Infrastructure connection)