2You can attach a WFT-E6 Wireless File Transmitter to the Canon Digital Cinema Camera EOSC300 Mark II to connect the camera to a Wi-Fi network and use the camera’s networkfunctions. This guide will explain how to attach the WFT-E6 to the camera and configure thetransmitter.For specifications and additional information about the WFT-E6, refer to the Wireless FileTransmitter WFT-E6 Instruction Manual. For details about how to use Browser Remote tooperate the camera, refer to the camera’s Instruction Manual.AssumptionsThe instructions in this guide assume you already have a correctly configured and workingwireless network. For details on configuring these settings, refer to the documentationprovided with the respective Wi-Fi equipment.Setting up the WFT-E6 Wireless File Transmitter and configuring the network settingsrequires adequate knowledge about configuring Wi-Fi networks. Canon cannot providesupport for configuring Wi-Fi networks.The instructions in this guide assume you are already familiar with basic camera operations,such as accessing and changing menu settings or displaying status screens. If necessary,refer to the camera’s Instruction Manual.Conventions used in this guideWarnings to avoid potential problems.Supplemental information.A Reference page number.“Access point” refers to a Wi-Fi network’s access point or wireless router. (Differentmanufacturers may call the device by different names.)For brevity’s sake, throughout this guide the WFT-E6 Wireless File Transmitter will bereferred to simply as the “transmitter”.About this GuideCanon shall not be liable for any loss of data or damage to the transmitter resulting from incorrectWi-Fi network configuration or settings. Additionally, Canon shall not be liable for any loss or damagecaused by the use of the WFT-E6 Wireless File Transmitter.Using an unprotected Wi-Fi network can expose your files and data to monitoring by unauthorizedthird parties. Be aware of the risks involved.Introduction