105E PlaybackChanging the Remote Sensor ModeTwo remote sensor modes and an off setting are available to prevent interference from other Canonwireless controllers being used nearby.To change the remote sensor mode of the camcorderChange the [WIRELESS REMOTE] setting of the custom function file ( 89).To change the remote sensor mode of the wireless controllerPress the ZOOM T button and keep it pressed for over 2 seconds to change the wirelesscontroller to mode 2. Press the ZOOM W button and keep it pressed for over 2 secondsto change the wireless controller to mode 1.If you have set the camcorder to mode 1, press the ZOOM W button for mode 1. The wireless controller returns to mode 1 when you replace the batteries. Change the mode ifnecessary. Make sure that the camcorder and wireless controller are set to the same mode. Display thecamcorder’s mode by pressing any button on the wireless controller (except the REMOTE SETbutton) and set the wireless controller’s mode to the same mode. Change the batteries if thewireless controller still does not work.