15E PreparationsPreparationsPreparing the Power SupplyCharging the Battery PackDisconnect the DC coupler from the power adapter before charging. Remove the terminal cover of thebattery pack.1. Connect the power cord to the adapter.2. Plug the power cord into a power outlet.3. Attach the battery pack to the adapter.• Press lightly and slide the battery pack in thedirection of the arrow until it clicks.• The charge indicator starts flashing. The indicatorwill stay on when the charging is completed.4. When the charging is completed, removethe battery pack from the adapter.5. Unplug the power cord from the poweroutlet and disconnect it from the adapter.Attaching the Battery Pack1. Turn the dial to OFF.2. Push the OPEN switch in the direction ofthe arrow to open the battery compartmentcover.3. Insert the battery all the way into thecompartment and press gently until itclicks.4. Close the battery compartment cover.To Remove the Battery1. Turn the dial to OFF.2. Push the OPEN switch in the direction of the arrow to open the batterycompartment cover.3. Press the BATT.RELEASE latch left and pull out the battery.4. Close the battery compartment cover.Charge indicator
