23E PreparationsLoading/Removing a CassetteUse only videocassettes marked with the logo. For recording in HDV we recommend you usevideocassettes compatible with the HDV standard.1. Slide the OPEN/EJECT switch to openthe cassette compartment cover.The cassette compartment opens automatically.2. Load/remove the cassette.• Insert the cassette straight, fully into thecompartment with the window facing out.• Remove the cassette by pulling it straight out.3. Close the cassette compartment bypressing on the mark on the cover.The cassette compartment will retract automatically.4. Close the cassette compartment cover. Do not interfere with the cassette compartment while it is opening or closing automatically. Be careful not to get your fingers caught in the cassette compartment.If the camcorder is connected to a power source, cassettes can be loaded/removed even if thedial is set to OFF.