Network SettingConguring the Printer’s NetWare Network SettingsFollow the steps below to congure the NetWare network settings.1. Start the web browser and enter the following URL in the Location (or Address) box to displaythe RemoteUI page.http://“printer IP address or name”/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.3. If a password has been set on the printer, enter the password.4. Click Network in the Device Manager menu at left to display the Network page.5. Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare ProtocolSettings page.6. Refer to the NetWare Settings Items table to complete the settings.NetWare Settings ItemsItem Details Default SettingFrame Type Specify the type of frame touse in NetWare.DisabledNCP Burst Mode Activate this setting to useNCP Burst Mode.This mode supports fast datatransfer when printing in queueserver mode. Normally, leavethe setting On.OnPrint Application Choose the print service.• Bindery PServer• RPrinter• NDS PServer• NPrinterNDS PServerPacket Signature Select If Requested by Serverto use packet signature.If Requested by ServerBinderyPServerFile Server Name Specify the name of a leserver that has a NetWare printserver.(0-47 characters)-Print Server Name Specify the name of a NetWareprint server.(0-47 characters)-Print Server Password Set a password for the printserver.(0-20 characters)-Polling Interval Specify the interval to conrmjobs.(1-15 seconds)5RPrinter Print Server Name Specify the name of a NetWareprint server.(0-47 characters)-Network Setting 575
