Network SettingSpecifying Printer-Related InformationSpecify device information, security, and email notication settings as follows.1. Start the web browser and enter the following URL in the Location (or Address) box to displaythe RemoteUI page.http://“printer IP address or name”/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.3. If a password has been set on the printer, enter the password.4. Click Information in the Device Manager menu at left to display the Information page.5. To display the relevant settings page, click Edit in the upper-right corner of Device Informationor Security, depending on what information you want to specify.To change the administrator password, click the Change Password button in the Security group.6. Refer to the table of settings for device information, security, and email notication as youcomplete these settings.Security setting items are displayed when you click the Change Password button in theSecurity group.Device Information SettingsItem Details Default SettingDevice Name Enter a device name.(0-32 characters)blankLocation Enter the location where thedevice is installed.(0-32 characters)blankAdministrator Enter the administrator’s name.(0-32 characters)blankPhone Enter the administrator’s contactinformation.(0-32 characters)blankComments(E-mail) Enter any comments regardingthe administrator.(0-32 characters)blankSecurity SettingsItem Details Default SettingNew Password Enter the new password.(0-9999999)blankConrm Enter the new password again toconrm it.(0-9999999)blankOn the Security settings screen, besides entering a password, you can specify other security-relatedinformation, such as IP address-based SNMP or TCP usage restrictions, MAC address-basedaccess restrictions, or IPP and FTP authentication settings.7. Click OK to activate the settings.Network Setting 577
