Problems with the printing qualityLine thickness is not uniformCause Corrective ActionIn the Special Settings dialog box of the Windowsprinter driver, Fast Graphic Process is selected.Access the printer driver Properties dialog box fromPrint in the File menu of the source application, andfollow these steps to print.1.Clear the option Open Preview When Print JobStarts on the Main sheet.2.Clear the option Page Layout on the Layoutsheet.3.Click the Special Settings button in the Layoutsheet to open the Special Settings dialogbox, and remove the check from Fast GraphicProcess.Load paper of the same type as you have speciedin the printer driver.(→P.106)(→P.136)The type of paper specied in the printer driver doesnot match the type loaded in the printer.Make sure the same type of paper is specied in theprinter driver as you have loaded in the printer.1.Press the Stop button and stop printing.2.Change the type of paper in the printer driver andtry printing again.Lines are misalignedCause Corrective ActionThe Printhead alignment is not adjusted. Adjust the Printhead alignment.(→P.604)(→P.606)(→P.608)Load paper of the same type as you have speciedin the printer driver.(→P.106)(→P.136)The type of paper specied in the printer driver doesnot match the type loaded in the printer.Make sure the same type of paper is specied in theprinter driver as you have loaded in the printer.1.Press the Stop button and stop printing.2.Change the type of paper in the printer driver andtry printing again.Problems with the printing quality caused by the typeof paperFor paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide.(→P.96)678 Troubleshooting
