Cause Corrective ActionThe loaded paper is a size notcompatible with borderlessprinting.(See Paper Reference Guide.)Press ▲ or ▼ to select Print With Border, and then press the OK button to con-tinue printing. The document will be printed with a border.Paper position not suitable for borderless printing.Cause Corrective ActionBecause paper expands or contractsdepending on the environment ofuse, it may become narrower or wid-er than the supported width for bor-derless printing.Press ▲ or ▼ to select Stop Printing, and then press the OK button.Use each type of paper only where the recommended environmental conditionsare met. For details on environmental conditions for various paper, see the Pa-per Reference Guide.(See Paper Reference Guide.)Select None when you have set Detect Mismatch in the Control Panel menu toWarning.However, note that this error may affect the printing quality.The paper is loaded askew. Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that theedges are between the ink grooves for borderless printing.Insert the roll firmly until it touches the flange of the Roll Holder.(See "Attaching the Roll Holder to Rolls.") →P.633Select None when you have set Detect Mismatch in the Control Panel menu toWarning.However, note that this error may affect the printing quality.Press ▲ or ▼ to select Print With Border, and then press the OK button tocontinue printing. The document will be printed with a border.Roll paper is not securely in contact with roll holder.Cause Corrective ActionWhen the roll was loaded, the roll was not in-serted firmly all the way on the Roll Holder.Follow these steps to reload the roll.1. Press the OK button and remove the roll holder from the printer.2. Insert the roll firmly on the Roll Holder until it touches the flange.(See "Attaching the Roll Holder to Rolls.") →P.6333. Load the Roll Holder in the printer.Error Message > Messages regarding paper >Paper position not suitable for borderless printing. iPF75513888
