4 Select the IPv6 tab.5 In IPv6, select On.6 When there is an IPv6-compatible router in the network environment, select On in Stateless Address.Additionally, when there is an DHCPv6-compatible server in the network environment, select On inDHCPv6.Note• When there is no IPv6-compatible router or DHCPv6-compatible server, select On in Manual and enter the IPv6Address and Prefix Length.7 Click Set.8 Click OK after the Confirmation message is displayed.9 Exit imagePROGRAF Device Setup Utility.iPF760 Configuring the IP Address Using imagePROGRAF Device Setup UtilityUser's GuideWindows Software Device Setup Utility277
