Paper to PrepareRolls An unused roll at least 10 inches wideSheets Two sheets of unused paper of at least A4/Letter sizePerform adjustment as follows.1 Load the paper.• Attaching the Roll Holder to Rolls →P.397• Loading Rolls in the Printer →P.399• Loading Sheets in the Printer →P.417Note• Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completed cor-rectly unless the loaded paper matches the settings.2 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5 Press ▲ or ▼ to select Feed Priority, and then press the OK button.6 Press ▲ or ▼ to select Adj. Quality, and then press the OK button.7 Press ▲ or ▼ to select Manual, and then press the OK button.Test pattern A is printed for manual adjustment.Note• When printing on sheets, follow the instructions on the Display Screen and remove the sheet.8 Examine test pattern A for adjustment. Determine thepattern in which banding is least noticeable.Note• If banding seems least noticeable in two patterns but you cannot decide which one is better, choose an inter-mediate value.For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.Manual Banding Adjustment (Adj. Quality) iPF760User's GuideAdjustments for Better Print Quality Adjusting the feed amount512
