Setting Item Description, InstructionsGL2 Set-tingsProces-singOp-tionPageSizeProcess1 Normally, the area available for printing excludes a marginrequired by the printer, and images are positioned according-ly. Selecting On in this setting eliminates any misalignment ofthe printing position if the image itself includes a border.PageSizeProcess2 Selecting On will determine the paper size based on the im-age rendering area.GL2 Set Print Print GL2 settings information.InterfaceSetupEOP Timer Specify the timeout period before cancellation of print jobsthat cannot be received by the printer.TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured auto-matically or a static IP address is entered manually.Protocol DHCP Specify the protocol used to configure the IP address auto-matically.BOOTPRARPIPv4SettingsIP Address Specify the printer network information when using a static IPaddress.Enter the IP address assigned to the printer, as well as thenetwork subnet mask and default gateway.Subnet MaskDefault G/WDNSSettingsDNS Dync update Specify whether DNS server registration is updated automati-cally.Pri. DNS SrvAddr Specify the DNS server address.Sec. DNS SrvAddrDNS Host Name Specify the DNS host name.DNS Domain Name Specify the DNS domain name.IPv6 IPv6 Support Specify whether to connect via IPv6.IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.DHCPv6 Specify whether DHCPv6 settings are used.DNSSettingsDNSDyncupdateStatefullAddrSpecify whether DNS server registration is updated automati-cally.State-lessAddrPri. DNS SrvAddr Specify the DNS server address.Sec. DNS SrvAddrDNS Host Name Specify the DNS host name.DNS Domain Name Specify the DNS domain name.NetWare NetWare Specify the NetWare protocol. To apply your changes,choose Register Setting.Frame Type Specify the frame type to use.Print Service Choose the print service.AppleTalk Specify whether to use the AppleTalk protocol. To apply yourchanges, choose Register Setting.EthernetDriverAuto Detect Specify the communication method. To apply your changes,choose Register Setting.Choose On for automatic configuration of the LAN communi-cation protocol. Choose Off to use settings values ofComm.Mode and Ethernet Type.Comm.Mode Choose the LAN communication method.Ethernet Type Choose the LAN transfer rate.Menu Settings iPF760User's GuideControl Panel Printer Menu454
