3 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.4 Press the OK button.The Set./Adj. Menu is displayed.5 Press ▲ or ▼ to select Maintenance, and then press the OK button.6 Press ▲ or ▼ to select Replace P.head, and then press the OK button.Ink is now drawn into the Maintenance Cartridge.After about two minutes, a message is shown on the Display Screen instructing you to open the Top Cover.Replace the Printhead1 Open the Top Cover.Instructions are now shown on the Display Screen regardingPrinthead replacement.Important• During Printhead replacement, do not move the Carriage from the position indicated. If you accidentally movethe Carriage, you will hear a warning tone, and Printhead replacement is no longer possible.If you move the Carriage by mistake, close the Top Cover. The Carriage will be moved to the position as indi-cated.iPF760 Replacing the PrintheadUser's GuideMaintenance and Consumables Printheads527
