Chapter 1515-115.1 Outline15.1.1 Overview of Upgrade 0011-1809iR2016J / iR2016 / iR2020 / / iR2016i / iR2020iThis machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as the PC) in which a servicesupport tool (hereafter called SST) has been loaded.System software programs and upgrade tools are listed in the following table:T-15-115.1.2 Overview of Service Support Tool 0011-1810iR2016J / iR2016 / iR2020 / / iR2016i / iR2020iF-15-1When using the SST, select "#DOWNLOAD" in the service mode to place the main unit in the download mode. (The finisher need not enter the download mode.)15.2 Making Preparations15.2.1 Registering the System Software 0011-1866iR2016J / iR2016 / iR2020 / / iR2016i / iR2020iSystem software programs to be downloaded need to be registered in the SST.The system software programs are registered with the names listed below.Machine name:iR2020Unit name:- Main controller: System- Boot program: Boot- PCL board: PCLThe system software registration program is explained below taking System as an example.[Preparation]Have the following ready:- PC in which SSTv3.21 or later is installed- System CD supplied with iR2020[System Software Registration Procedure]1) Start the PC.2) Insert the system CD in the PC.Type System software type Upgrade tool RemarksSSTMain unit System (main controller) Yes The main controller also controlsthe reader.Boot (boot program) YesOption PCL (PCL printer kit-J1) YesFin_U1 (Finisher-U1) Yes Dedicated service tool(Downloader PCB: FY9-2034)CPU USB cableRS232Cstraight cableImage processor PCBPCL printer kit-J1Finisher-U1Finisher controller PCBMain unitDownloaderPCBFY9-2034PCJ303Flash ROMFlash ROMCPUFlash ROMJ918SystemsoftwareSST32MB ROM PCB
