Chapter 1010-3910.5.23 Circuit Breaker10.5.23.1 Before Removing the Circuit Breaker 0019-3708iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N1) Remove the upper rear cover. (page 10-17)Reference[Removing theUpper Rear Cover]2) Remove the lower rear cover. (page 10-17)Reference[Removing theLower Rear Cover]10.5.23.2 Removing the Circuit Breaker 0018-9973iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N1) Remove the 3 screws [1, 2].F-10-1122) Slide the pedestal connector [1] and free the harness from the wire saddle[2].F-10-1132) Remove the 4 fastons [1] and the circuit breaker [2].F-10-114[2][1][1][2]Points to Note At InstallationBe sure to fit the fastons of the appropriate colors and install them as shownin the following figure.[1][1][2][1][1][BK][WH][BK][WH]
