Chapter 1717-2817.2.1.9 COPIER > DISPLAY > SENSOR 0019-9277iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245NT-17-717.2.1.10 COPIER > DISPLAY > ALARM-2 0019-9859iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245NF-17-11 Alarm sequential number: 1 to 50 (The oldest alarm has the greatest number.) Alarm occurrence date Alarm occurrence time Alarm reset time Alarm location code and alarm code Alarm detail code Total counter value at alarm occurrence17.2.1.11 COPIER > DISPLAY > ENVRNT 0019-9860iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245NEnvironmental log displayChanges of [In-machine temperature (deg C)/humidity (%) / Fixing roller surface (center) temperature (deg C) are displayed as log data.Remarks: The data acquisition cycle can be set at COPIER>OPTION>BODY>ENVP-INT in Service Mode.GAIN-E 2 Title Adjustment value of gain level in even bit on CCDPurpose To judge if this adjustment value is correct when an image fault attributed to CCD occurs.Note -Displays, settings andadjustment ranges-Unit -Appropriate guideline 0 to 255Related service modes -Additional description andnotes-COPIER > DISPLAY > SENSORItem Level DescriptionDOC-SZ 2 Title Display of the original size identified by original size sensorPurpose -Situation -Note -Displays, settings andadjustment ranges-Unit -Appropriate guideline -Related service modes -Additional description andnotes-COPIER > DISPLAY > CCDItem Level Description
