Changing the Copy (Zoom) Ratio3-203Basic Copying and Mail Box Features❑ Press [OK].You can enter either the width or the length of the original size. If you enter the width for theoriginal size, make sure to enter the width for the copy (record) size as well, and vice versa.The machine automatically calculates the correct copy (zoom) ratio based on the values youentered; however, the original image may be cut off slightly depending on the paper (record)size.If the computation results in a zoom ratio greater than 200%, place your original on theplaten glass.If the computation results in a zoom ratio less than 25% or greater than 400%, a messageappears telling you that values below 25% will be set to 25%, and values above 400% will beset to 400%.The selected mode is set, the display returns to the Copy Basic Features screen and thecopy (zoom) ratio generated by the machine is displayed.NOTE• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in theReference Guide.• To specify the horizontal (X) and vertical (Y) axis independently, press [XY Zoom].5 Press .Copying starts.NOTE• To return the copy (zoom) ratio to 100%, press [1:1].• To cancel this setting, press [Copy Ratio]➞ [Other Zoom]➞ [Zoom Program]➞ [Cancel].• To cancel all settings and return the machine to the Standard mode, press .
