Two-Sided Copying/Printing 3-513Basic Copying and Mail Box Features3 Press [OK].The display returns to the Copy Basic Features screen, and <2 2-Sided> is displayed above[Two-sided].4 Press .If the original is placed on the platen glass, follow the instructions that appear on the touchpanel display ➞ press once for each original. When scanning is complete, press [Done].Copying starts.NOTE• To cancel this setting, press [Two-sided]➞ [Cancel].• To cancel all settings and return the machine to the Standard mode, press .2 to 1-SidedThis mode automatically turns over two-sided originals placed in the feeder to make one-sidedcopies on different sheets of paper.IMPORTANT• 2 1-Sided copying is available only if the optional Feeder (DADF-N1) is attached.• The 2 1-Sided mode cannot be used with the following mode(s).- Copy: Two-page Separation, Image Combination, Transparency Interleaving• Make sure to place originals with a horizontal (landscape) orientation, such as A4R and A5R,horizontally. If these originals are placed vertically, the back side of the copy is printed upside down.NOTE• The 2 1-Sided mode is available for the Copying function only.• If you want to place your two-sided original on the platen glass, use the Job Build mode in SpecialFeatures to execute 2 1-Sided copying. (See "Job Build," on p. 4-50.)Original Copies
