Interrupt Mode1-421Introduction to the Copying FunctionsInterrupt ModeThis mode enables you to Interrupt the current job or a reserved job to make priority copies.This mode is useful if you need to make a rush copy during a long copy job.NOTEYou can make interrupt copies whenever the machine is ready to scan.1 Press .If you want to make copies after changing the Department ID while Department IDManagement is enabled, press ➞ enter the Department ID and password using -(numeric keys). (See Chapter 2, "Basic Operations," in the Reference Guide.)NOTEThe current job does not stop printing immediately after you press . Printing of the current jobstops only when the actual printing of the priority or interrupt copy starts.2 Place your originals ➞ set the desired copy modes.NOTE• To cancel the Interrupt mode, press .• To cancel previously set copy modes, press . (The Interrupt mode itself is not cancelled.)
