1-2ReportMemoryReferenceFax MonitorDelayedTransmissionBook SendingClearDeleteSpace+FunctionRedial / PauseCoded DialDirectoryReceive ModeFAX ResolutionOne-Touch Speed Dialing KeysThe keys marked 01 to 12 can be used to dial pre-registered fax/telephone numbers.To dial using these keys, you need to register the number for one-touch speed dialing.When the Function key is pressed and the indicator lights green, the following keys can beused for the fax functions.Also, if fax functions are programmed into these keys, they can be used directly as One-Touch Keyswithout pressing Function to execute the fax functions.Fax Monitor KeyConfirms the status of fax communication.Memory Reference KeyConfirms documents stored in the machine for memory sending or memory receiving.Report KeyPrints a report listing fax communications, dial list, data list or document list.You can also use this key to cancel the printing job.Delayed Transmission KeySpecifies the fax sending time for the delayed sending function.Book Sending KeyThis key can be used to send documents from the platen glass.+ KeyEnters a plus sign (+).Space KeyEnters a space between letters and numbers.Delete KeyDeletes characters one by one.Clear KeyDeletes all characters. Function KeyAfter pressing this key, you can use the keys marked01 to 12 (except for 06 to 08) for the fax functions.Lights green when the key is pressed and goes off whenthe key is pressed again.Redial/Pause KeyDials the last number dialed with the numeric keys,or inserts a pause within and/or after a number.Coded Dial KeyThe key can be used to dial fax/telephone numbers pre-registered under a two-digit code. To dial by using this key,you need to register a number for the coded speed dialing.Directory KeySearches fax/telephone numbers pre-registered underthe One-Touch Speed Dialing Keys or Coded Speed DialingKeys using the names of the registers.FAX Resolution KeySelects the fax resolution: STANDARD, FINE, PHOTO, SUPER FINEor ULTRA FINE.Receive Mode KeySelects the receive mode.