Canon imageCLASS D780 Fax Manual

Also see for imageCLASS D760: Printer guide Setup instructions Reference guide Specification

Contents

4-12You can check the status of sending or receiving fax, or sending reservation.• You do not need to press Function in step 1 to execute the Fax Monitor function if FAX MONITOR isprogrammed in PROGRAM 1-TOUCH KEY. (→ p. 9-4)Confirming Transmission StatusThe sending or receiving status can be confirmed using the following method:Confirming Sending ReservationSending reservation or checking if there is a document being scheduled to be sent can be confirmed using thefollowing method:NOTEConfirming Transmission Status and Sending Reservation1 Press Function while In Use/Memory isflashing.2 Press Fax Monitor.3 Press Set.Ex:• To return to standby display, pressStop/Reset.• If you perform the procedure above whenthe machine is not sending or receivingfaxes, NO CURRENT RX/TX JOB willappear, and the display will return to thedisplay shown in step 2.• The transaction number, TX/RX means thefollowing:– 0001 to 4999: A sent document;– 5001 to 9999: A received document.NOTE16:50 0056 TX12345FAX MONITOR1.RX/TX STATUS1 Press Function while In Use/Memory islit.2 Press Fax Monitor.3 Press 4 (–) or e (+), then select 2.TXRESERVE STATUS.4 Press Set.Ex:• The sending reservation can be confirmed bychecking the sending time, TX/RX NO. or faxnumber.5 Press 4 (–) or e (+) to confirm thesending reservation.Ex:• To return to standby display, pressStop/Reset.• If you perform the procedure above whenthere is no sending reservation, NO DOC.STORED will appear, and the display willreturn to the display shown in step 3.• You can also check the reservations byprinting out the DOCUMENT MEMORYLIST. (→ p. 4-13)NOTE17:00 0058 TX STNDBY20 545 858416:00 0056 TX STNDBY905 795 1111FAX MONITOR2.TX RESERVE STATUSFAX MONITOR1.RX/TX STATUSDestinationTX/RX modeTX/RX numberScanned/received time