12345678910114-59PreviousBack NextTOPBefore Using theMachineOriginal and PaperCopyingSending andReceivingPrinting andScanningNetwork (imageCLASSMF7480/MF7470 Only)Remote UI (imageCLASSMF7480/MF7470 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of Contents3. Select the destination to be erased, then press[Erase].You cannot erase multiple destinations at the same time.Press the alphanumeric keys (e.g., [ABC]) to display the individualkeys for each letter or number. You can select a letter or numberto restrict the displayed range of entries. Press [All] to return tothe full address list.If the desired destination is not displayed, press [ ] or [ ] toscroll to the desired destination.You can restrict the type of destinations displayed in the resultslist by pressing the Type drop-down list.You can select a destination and press [Details] to confirm thedetailed information related to the selected destinations. Press[Done] to return to the previous screen.If you select [All] in the Address Book drop-down list, thedestinations stored in the one-touch buttons are displayed.However, you cannot erase these destinations. For instructionson erasing one-touch buttons, see “Erasing One-Touch Buttons,”on p. 4-59.4. Press [Yes].To cancel erasing, press [No].The message appears for approximately two seconds onthe touch panel display.5. Press [Done] repeatedly until the Send BasicFeatures screen appears.––––––Erasing One-Touch Buttons1. Press (Additional Functions).2. Press [Address Book Settings] → [One-touchButtons].If a password has been set for the Address Book, enter the passwordusing – (numeric keys), then press [OK] to enter the AddressBook Settings menu. (See “Setting a Password for the Address Book,”on p. 8-16.)The Register One-touch Button screen appears.3. Select a one-touch button containing thedestination(s) you want to erase, then press[Erase].If the desired one-touch button is not displayed, press [ ] or [ ]to scroll to the desired one-touch button.You can also specify the one-touch button’s number by enteringthe three digit number of the desired one-touch button using– (numeric keys).Make sure that you verify the settings first before you erase them.One-touch buttons that already have destinations stored in themare displayed with a black square ( ) in the lower right corner ofthe key.If you select a one-touch button that already has destinationsstored in it, the destinations are displayed.If you register multiple destinations as a group address in a one-touch button, the number of destinations registered in the groupaddress is displayed.4. Press [Yes].To cancel erasing, press [No].The message appears for approximately two seconds onthe touch panel display.––––––
