12345678910116-22PreviousBack NextTOPBefore Using theMachineOriginal and PaperCopyingSending andReceivingPrinting andScanningNetwork (imageCLASSMF7480/MF7470 Only)Remote UI (imageCLASSMF7480/MF7470 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of Contents7. Enter the name of the workgroup the machinebelongs to, using the keyboard on the touchpanel display, then press [OK].If there is no workgroup on your environment, you do not need toenter the workgroup name.You cannot enter the domain name as the workgroup name.You cannot enter a character string that includes blanks in[Server] and [Workgroup].8. Press [Next], then [Comment].9. Enter a comment about the printer if necessary,then press [OK].If you display the printer information, the comment you specifiedhere appears.10. Select [On] or [Off] for .[Off ]: Does not notify the LAN Manager of its existence on thenetwork.[On]: Notifies the LAN Manager of its existence on the network.11. Press [OK].12. Press [Done] repeatedly until the AdditionalFunctions screen closes.13. Restart the machine.Turn off the machine, wait at least 10 seconds, then turn it on.––Configuring a Shared FolderTo send data from the machine to a computer on your network, youneed to specify the settings of the computer for receiving data. Youcan send data over a NetBIOS network to a Windows shared folder.The following procedures describe a sample shared folder configuration.Depending on your environment, the actual configuration procedure maydiffer.Windows 98/MeIf a suitable Windows 2000/XP/Server 2003/Vista machine is available onyour network, it is recommended that you configure that machine as afile server instead of using a Windows 98/Me machine.In the following procedures, items displayed on the screen for Windows98 are used; items might differ depending on your operating system.––
