123456789101110-34PreviousBack NextTOPBefore Using theMachineOriginal and PaperCopyingSending andReceivingPrinting andScanningNetwork (imageCLASSMF7480/MF7470 Only)Remote UI (imageCLASSMF7480/MF7470 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsIs the destination stored in the Address Bookcorrect?Check that the Address Book settings are registeredcorrectly. (See “Storing/Editing Address Book,” onp. 4-44.)Did you dial the correct number?Check that you have the correct number.Is the machine in the Sleep mode?The machine does not scan documents if it is in theSleep mode. To take the machine out of the Sleepmode, press the Control Panel Power Switch on thecontrol panel.Is the recipient’s machine out of paper?Ask the recipient to make sure paper is loaded in themachine.Are there other documents being sent frommemory?Allow time for the documents to finish sending.Has an error occurred during transmission?Print an Activity Report and check for an error.(See “Printing the Fax Job Log (Activity Report),” onp. 4-77.)QAQAQAQAQAQAIs the telephone cable connected properly?Make sure the cable is connected properly. (See “SetUp the Machine,” in the Starter Guide.)Is the telephone line working properly?Make sure there is a dial tone when you press [Hook].If there is no dial tone, contact your local telephonecompany.Is the recipient’s machine a G3 fax machine?Make sure the recipient’s machine is compatible withyour machine.Is the error code #0018 shown on the ERROR TXREPORT?The fax number you dialed is busy. Try sending thedocument later.The recipient’s machine is not working. Ask therecipient to check the machine.Did the recipient’s machine answer within 35seconds (after all automatic redialing attempts)?Ask the recipient to check the machine. For anoverseas call, add pauses to the registered number.(See “Dialing an Overseas Number (With Pauses),” onp. 4-43.)QAQAQAQAAQA
