12345678910116-9PreviousBack NextTOPBefore Using theMachineOriginal and PaperCopyingSending andReceivingPrinting andScanningNetwork (imageCLASSMF7480/MF7470 Only)Remote UI (imageCLASSMF7480/MF7470 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsMachine Connection Method (LPD/Raw)Connecting to a TCP/IP Network:All computers that use the machine must have TCP/IP clientsoftware installed and must be enabled for TCP/IP network use. Fordetails, see the manuals provided with the operating system.Installing the Printer Driver and Specifying the MachineDestination Setting:To print from a computer, you must install a printer driver andspecify a setting for the machine destination. The machinedestination setting differs depending on the print application usedfor printing. Use the following information as a guide to determinethe print application you are using, and then perform the necessaryoperations.LPD: This is the print application generally used with TCP/IP.Raw: This is a print application used with Windows 2000/XP/Server 2003/Vista. It can print at higher speeds than LPD.In the following procedures, items displayed on the screen for Windows XPare used; items might differ depending on your operating system.1. Open the printer properties dialog box.For Windows Vista, click [Start] on the Windows task bar →[Control Panel] → [Hardware and Sound] → [Printer].For Windows 2000, click [Start] on the Windows task bar →[Settings] → [Printers].For Windows XP Professional/Server 2003, click [start] on theWindows task bar → [Printers and Faxes].For Windows XP Home Edition, click [start] on the Windowstask bar → [Control Panel] → [Printers and Other Hardware] →[Printers and Faxes].2. Right-click the icon of the printer you installed→ select [Properties].––––––3. Display the [Ports] sheet by clicking the [Ports]tab.4. Open the [Printer Ports] dialog box by clicking[Add Port].5. From [Available ports types], select [StandardTCP/IP Port] → click [New Port].The Add Standard TCP/IP Printer Port Wizard starts.6. Click [Next].
