Handling rollsMedia Detailed Settings Dialog Box (Mac OS X)The Media Detailed Settings dialog box offers the following settings. For details on settings items, refer tothe printer driver help.Note• To display the Media Detailed Settings dialog box, on the Main Pane (Mac OS X) (→P.564) , clickSettings by Media Type.Setting Item DescriptionA Media Type Select the paper type.For information on the types of paper the printer supports, refer to the PaperReference Guide . (→P.167)B Drying Time Specify the time that the printer waits for ink to dry, as needed. The DryingTime setting is only valid for rolls.(→P.196)C Between Pages Specify the time the printer waits after printing a page until ejecting thepaper, as needed.D Between Scans Specify the time the printer waits after printing a line on the page untilprinting the next line, as needed.E Roll Paper Margin forSafetyYou can specify the length of a margin on the leading edge of paper toensure that paper susceptible to curling is held rmly against the Platen .F Near End Margin Specify the length of the Near End Margin (the leading edge margin) of theroll, as needed.G Cut Speed Select the speed of automatic cutting, as needed. You can adjust this settingif paper is not cut well when automatic cutting is used.H Automatic Cutting You can activate or deactivate Automatic Cutting and printing of cut lines,as desired. In this list, specify Yes , No, or Print Cut Guideline .I Calibration Value You can specify whether to apply the results of calibration performed on theprinter to image processing.J Mirror Specify whether to print a mirror image, as needed. Select this option to printa version of the document or image with the left and right sides inverted.Handling Paper 207
