Adjusting the feed amountAdjusting the Feed Amount ManuallyIf printed images are affected by banding in different colors, adjust the amount that paper is fed.This topic describes how to adjust the feed amount manually.When using highly transparent media for which automatic adjustment is not supported, adjust the feed amountmanually. We recommend automatic adjustment for other types of media. For instructions on automaticadjustment, see “Adjusting the Feed Amount Automatically”. (→P.654)Note• To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printedat exactly the right length, for example), specify the amount of paper stretching or shrinkage whenadjusting the feed amount. (→P.661)Important• Use paper of the same type and size for adjustment as you will use for printing.• To apply the results of adjusting the feed amount in printing, you must rst set Feed Priority to BandJoint. Note that if you select Automatic, the results of adjustment will only be applied in printing if youset Print Priority in the printer driver to Image or Ofce Document. (→P.241)Follow these steps to change the Feed Priority setting.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Paper Details, and then press the ► button.3. Press ▲ or ▼ to select the type of paper, and then press the ► button.4. Press ▲ or ▼ to select Feed Priority, and then press the ► button.5. Press ▲ or ▼ to select Band Joint, and then press the OK button.Maintenance 657
