Network Setting (Windows)• If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)1. In Tree Name and Context Name, enter the tree and context name of the print server. Do notexceed 255 characters for the context name.2. In Print Server Name, enter the name of the print server created in Specifying NetWarePrint Services. (→P.628)3. In Print Server Password, enter the password of the print server created in SpecifyingNetWare Print Services. (→P.628)4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.• If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)1. In Print Server Name, enter the advertising name of the print server created in SpecifyingNetWare Print Services. (→P.628) Usually, the advertising name is the same as the name ofthe print server.2. In Printer Number, enter the same printer number specied in Specifying NetWare PrintServices. (→P.628)11. Click OK to display the Network page.12. Click Reset to activate the settings.For a list of NetWare protocol settings items, see “Conguring the Printer’s NetWare Network Settings”.(→P.624)Note• If you use RemoteUI to display the print log in RPrinter or NPrinter mode, the document and userinformation cannot be obtained. Thus, Document Name only indicates Unknown, and the User Nameinformation is identied as RPRINTER/NPRINTER.632 Network Setting
