About the Printhead• If the printhead rubs against the paper during printing, this may cause damage to the printhead. If the printhead isrubbing against the paper, configure the Vacuum Strength in the Step 5: Configure the amount of ink useddialog box as follows.• For paper-based media such as Heavyweight Coated Paper: Set to Strong or Strongest• For film-based media such as CAD Tracing Paper: Set to Standard, Strong, or Strongest• For thin paper of thickness 0.1mm or less: Set to WeakestNote• If the printhead still rubs even after changing the Vacuum Strength, set the Head Height to be higher in the Step 5: Config-ure the amount of ink used dialog box.• For details on how to handle the printhead rubbing against the paper, see "Paper rubs against the printhead." ➔ P.951About Borderless Printing• When performing borderless printing on paper where the ink does not dry well, the cutter unit may leave scratcheswhere it touches the printed surface, or may not cut correctly. In this kind of situation, configure the amount of timeto wait for the ink to dry after printing using Drying Time in the Roll Paper Settings dialog box.Alternatively, if the paper cannot be cut well by the cutter, set the Automatic Cutting Settings to User Cut in theRoll Paper Settings dialog box, and cut the roll paper using scissors, etc.About the Color Tone• The color tone cannot be configured using the Media Configuration Tool. If the color tone needs to be adjusted,provide an ICC color profile that matches the paper you are using, and select that ICC color profile in your soft-ware. For details on how to specify the ICC color profile in the printer driver, see "Matching Sheet ." ➔P.177• Custom paper cannot be used with the ambient light adjustment function or Monitor Matching in Color-MatchingMethod.Checking the updateChecking the updateAfter updating the media information using the Media Configuration Tool, you can check whether the update has beenapplied to the printer in the control panel of the printer.1 Click the About button in the Media Configuration Tool main window to open the About dialog box.2 Check the value xx.xx (xxxx) of MIT DB Version.3 Check the value xx.xx (xxxx) of MIT in Settings/Adjustment Menu > Printer Info > System Info in the printercontrol panel.If the values in Steps 2 and 3 are the same, the update has been applied to the printer.Checking the update iPF6400SUser's GuideHandling and Use of Paper Media Configuration Tool (Windows)580
