Cause Corrective ActionIn other cases, the Cutter Unitmay be damaged.Contact your Canon dealer for assistance.End of paper feed.End of paper feed.Cause Corrective ActionAlthough an attempt was made to advance the paper manually, it reached the limit positionthat can be advanced.Canceling manual advancing.(See "Feeding Roll Paper Manually.") âž” P.517Borderless printng not possible.Borderless printng not possible.Cause Corrective ActionThe print job received speci-fies a type or width of paperthat is not compatible with bor-derless printing.Follow these steps to change the settings of the print job to enable borderless printing.1. Press â–˛ or â–Ľ to select Stop Printing, and then press the OK button.2. Make sure the correct printer driver for the printer is selected and try printing again.For information on types of paper compatible with borderless printing, refer to the Paper ReferenceGuide.(See "Displaying the Paper Reference Guide.") âž” P.500Press â–˛ or â–Ľ to select Print With Border, and then press the OK button to continue printing. The documentwill be printed with a border.The loaded paper is a size notcompatible with borderlessprinting.Press â–˛ or â–Ľ to select Stop Printing, and then press the OK button.Replace the paper with paper compatible for borderless printing as follows.1. Press â–˛ or â–Ľ to select Change Paper, and then press the OK button.(See "Removing the Roll from the Printer.") âž” P.514(See "Removing Rolls From the Roll Holder.") âž” P.5162. Replace the paper with paper compatible for borderless printing.(See "Loading Rolls on the Roll Holder.") âž” P.507(See "Loading Rolls in the Printer.") âž” P.509The printer now starts printing the print job.For information on types of paper compatible with borderless printing, refer to the Paper ReferenceGuide.(See "Displaying the Paper Reference Guide.") âž” P.500Press â–˛ or â–Ľ to select Print With Border, and then press the OK button to continue printing. The documentwill be printed with a border.The paper is loaded askew. Press â–˛ or â–Ľ to select Change Paper and straighten the paper so that the edges are between the inkgrooves for borderless printing.Insert the roll firmly until it touches the flange of the Roll Holder.For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in) rolls, attach the included Spacerfor Borderless Printing to the Roll Holder.(See "Loading Rolls on the Roll Holder.") âž” P.507Select None when you have set Detect Mismatch in the Control Panel menu to Warning.However, note that this error may affect the printing quality.Press â–˛ or â–Ľ to select Print With Border, and then press the OK button to continue printing. The documentwill be printed with a border.Press â–˛ or â–Ľ and select Stop Printing or press the Stop button to stop printing.iPF6400S End of paper feed.User's GuideError Message Messages regarding paper979
