Important• If you set the Head Height lower than the automatically set height in parentheses ( ), check that the printhead doesnot rub against the paper. (If the printhead rubs against the paper, there will be scratches in the printing results.) Ifthe printhead rubs against the paper, this can cause damage to the printhead.• If you change the Vacuum Strength, check that the printhead is not rubbing against the paper. (If the printheadrubs against the paper, there will be scratches in the printing results.) If the printhead rubs against the paper, thiscan cause damage to the printhead.• For details on the Head Height and Vacuum Strength, refer to the help.14 The Step 6: Confirm the settings dialog box is dis-played.Configure the settings of the custom paper, and thenclick the Next button.15 The Confirm Update dialog box is displayed.Confirm the updates and then click the Execute button.The custom paper is added to the control panel of theprinter and to the printer driver of the PC you are using.Important• If you have added custom paper with the POP Board / Cardboard category as the Standard Paper, remove theloaded custom paper from the printer.Note• When the custom paper is correctly added to the printer driver, the name of the added custom paper is displayed inthe Edit Media Types dialog box that is opened by Add Genuine Paper in the Media Configuration Tool window.iPF6400S Add Custom PaperUser's GuideHandling and Use of Paper Media Configuration Tool (Mac OS)605
