22 2-822-82Technology > Embedded RDS > Service cautionsTechnology > Embedded RDS > Service cautionsCom-Log ReportThe report output of the communication error logging information on five affairs can be carriedout.#REPORT > #REPORT OUTPUT > ERDS COM LOG LISTOutput sample01/17 2009 10:14******************************* E-RDS-COM-LOG *******************************No.01 DATE 05 18 2009 TIME 03:21 CODE 05000003Information SUSPEND: Communication test is not performed.No.02 DATE 05 18 2009 TIME 03:21 CODE 00000000Information SUNSEND: mode changed.No.03 DATE 05 18 2009 TIME 03:18 CODE 05000003Information SUSPEND: Communication test is not performed.No.04 DATE 05 18 2009 TIME 03:18 CODE 00000000Information SUNSEND: mode changed.No.05 DATE 05 18 2009 TIME 01:56 CODE 05000003Information SUSPEND: Communication test is not performed.Service cautionsAfter performing the following service activities it is necessary to perform Service mode#CLEAR > ERDS-DAT and #E-RDS.Failure to do so will result that the counter transmitting value to the UGW may becomeunusual.System upgradeHDD format and system installationCOPIER > Function > Clear > MN-CONTAlso, after replacing the main controller board, all settings must be reprogrammed.The following settings in service mode must not be change unless there are specificinstructions to do so. Changing these values will cause error in communication with UGW.Service mode Default#E-RDS > RGW-PORT 443#E-RDS > RGW-ADDRESS https://a01.ugwdevice.net/ugw/agentif010•••T-2-45T-2-45
