Canon imageRUNNER 2530 Service Manual

Also see for imageRUNNER 2520: Printer guide User guide Client guide User guide Easy operation guide

Contents

66 6-36-3Troubleshooting > Upgrading Targets and Procedure > ProcedureTroubleshooting > Upgrading Targets and Procedure > ProcedureProcedureMEMO:The procedure for upgrading Boot is described below as a typical example. Use thesame procedure for other firmware.1) Turn ON the power switch of the PC and start up the UST.2) When the power switch is turned ON, a Found New Hardware Wizard appears. Click[Cancel].3) Enter the service mode. ( key > 2 Key > 8 Key > key)4) Select [DOWNLOAD] by pressing the arrow key, then press the [OK] key.MEMO:You can also enter the download mode from the following user mode:> System Settings > Firmware Upgrade > Yes5) When “USB DOWNLOAD AVAILABLE” is displayed, start up the UST.F-6-2F-6-26) Click [Next] following the instruction shown on the screen.7) Click [Next] following the instruction shown on the screen.F-6-3F-6-3F-6-4F-6-4