Canon mf6600 Series Service Manual

88 8-78-7Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW03 > Detailed Discussions of Bit 7Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW03 > Detailed Discussions of Bit 7Service Soft Switch Settings (SSSW)OutlineBit Switch CompositionThe items registered and set by each of these switches comprise 8-bit switches. The figurebelow shows which numbers are assigned to which bits. Each bit has a value of either 0 or 1.001#SSSW0 0 0 0 0 0 0 0Bit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0Do not change service data identified as "not used"; they are set as initial settings.SSSW-SW01:List of FunctionsBit Function 1 00 service error code output not output1 not used - -2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -Detailed Discussions of Bit 0Selects whether or not service error codes are output.When output is selected, service error codes is report.F-8-2F-8-2T-8-17T-8-17SSSW-SW03List of FunctionsBit Function 1 00 not used - -1 not used - -2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 tonal signal before CED signaltransmissiontransmit do not transmitDetailed Discussions of Bit 7Use it to enable/disable transmission of a 1080-Hz tonal signal before transmission of theCED signal.Select 'transmit' if errors occur frequently because of an echo when reception is fromoverseas.MEMO:Any of the following error code may be indicated because of an echo at time ofreception##0005, ##0101, ##0106, ##0107, ##0114, ##0200, ##0201, ##0790T-8-18T-8-18