131Trouble?ECOULD NOT PRINT XIMAGESYou attempted to use the print order settings to print X images that wererecorded with another camcorder, with a different compression or wereedited on a computer.SET PRINT ORDER No still images on the memory card have been marked with a printorder.CANNOT TRIM You attempted to trim an image that was recorded with anothercamcorder.READJUST TRIMMING You changed the print style after you set the trimming settings.PRINTER ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the error persists, consult your dealer or a Canon ServiceCenter listed in the Contact List provided with the printer or the printermanual.PRINT ERROR Cancel printing, disconnect the USB cable and turn off the printer. After awhile, turn the printer back on and reconnect the USB cable. Check theprinter status. If the error persists, consult your dealer or a CanonService Center listed in the Contact List provided with the printer or theprinter manual.When you are printing using the button, check the print settings.HARDWARE ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the printer is equipped with a battery, it might be exhausted. Insuch case, turn off the printer, replace the battery and turn it back on. Ifthe error persists, consult your dealer or a Canon Service Center listed inthe Contact List provided with the printer or the printer manual.RECHARGE THEPRINTER BATTERYThe printer battery is depleted.COMMUNICATIONERRORThe printer is experiencing a data transmission error. Cancel printing,disconnect the USB cable and turn off the printer. After a while, turn theprinter back on and reconnect the USB cable. When you are printingusing the button, check the print settings.Or, you attempted to print from a memory card that contains a largenumber of images. Reduce the number of images.CHECK PRINTSETTINGSThe print setting cannot be used for printing with the button.PRINTER IN USE The printer is in use. Check the printer status.PRINTER WARMING UP Printer is warming up. If the message does not disappear after a fewseconds, check the printer status.PAPER LEVER ERROR Paper lever error occurred. Adjust the paper selection lever to the properposition.PRINTER COVER OPEN Close the printer cover securely.NO PRINTHEAD No print head is installed in the printer or print head is defect. Refer to theinstruction manual of your printer.Message Explanation
