98DV DubbingYou can input video from other digital video devices via the DV terminal, and record theinput video on the tape in the camcorder. You can also record the input video as a movieor still image on a memory card.ConnectingCheck the type and orientation of the DV terminal and make sure you connect the DVcable properly.Refer also to the instruction manual of the connected device.DubbingAvailable only in the mode.1. Load a blank cassette in this camcorder.If “AV DV” is displayed, change the setting ( 65).2. Connected device: Load the recorded cassette.3. Press the REC PAUSE button.4. Connected Device: Play back the tape.You can check the picture on the screen.5. Press the / button when the scene you wish to record appears.Recording starts.6. Press the button to stop recording.• Press the / button to pause recording.• Press the / button again to restart recording.7. Connected Device: Stop playback.Recording the Input Video on a Memory CardThe size of the still image recorded on the memory card will be 640 x 480. The still imagequality and the movie size can be selected.Available only in the mode.1. Check that a memory card is inserted.• If a cassette is loaded, make sure that the tape is stopped.• If “AV DV” is displayed, change the setting ( 65).Signal flowCommercially available DV cableDigital video device(e.g. camcorder)Output
